HHD WB Water Block

Eltek WB Water Block.

The Water Block valve is an overflow safety device, which controls the maximum continuous flow of water between 1.3 and 13.2 gallons. Its function is to measure the number of gallons of water that have passed through it. If this quantity exceeds the set value, the Water Block stops the flow and keeps this safety condition until user intervention. If the water volume does not exceed the set value, the Water Block mechanically and automatically resets the measured volume and the Water block is ready to restart a new measurement cycle. The Water Block does not require power, simply water flowing through it.

Burst Pressure: 725 PSI
Max. Static Pressure: 145 PSI
Min. Flow Rate: .5 GPM
Max. Water Temperature: 158F
Inlet: 3/4" MGH
Outlet: 3/4" FGH
Rated Life Span: Aprox. 80,000 GAL

Water Block to be installed in vertical position only.

Manufactured by ELTEK Group